Previous        Up        Next

Multi-Tap Delay






The Multi-Tap Delay creates echo effects by mixing the original signal with four delayed signals that can be panned independently of each other.


Delay Unit - Sets the delay to be in milliseconds or steps.  Available in the multitrack editor only.


Step Length - Sets the delay steps to 1/16 or 1/8T of a note.  Eighth triplet is the equivalent of 1/12 of a note.  Available in the multitrack editor only.


Mono/Stereo - Sets the delay to operate in mono (mixes the left and right input signals) or stereo.


Parameter Selector - Selects the parameter.  You can also click on a parameter to select it.


Parameter Value - Sets the value for the selected parameter.


Delay - The amount of time the signal is delayed.


Level - The level of the delayed signal.


Pan - Pans the delayed signal to the left or the right.


Repeat Delay - The amount of time the feedback signal is delayed.


Feedback - The amount of the output signal that is fed back into the input.  Negative numbers invert the feedback signal.


Damp Low Freqs. - The amount that the feedback signal is high pass filtered.


Damp High Freqs. - The amount that the feedback signal is low pass filtered.


Dry/Wet - The balance between the dry and wet signals.